Roberts Spray 37 Project
General Specification
Construction
- GRP construction
- Based on the Spray 28 design
- Very heavily built (using female mould)
- Epoxied (2 coats) below the waterline
- Hull is insulated with 1/2in closed cell foam overlaid with 2oz mat
Mechanical & Electrical
- No engine
Accommodation
- 3 cabins
- Wheelhouse forward of the cockpit
- Main saloon is 2.4m x 3.7m (8ft x 12ft) and requires fitting out
- Aft of the saloon, the galley (currently just consists of carcasses) is to starboard and the heads compartment to port
- Cooker with 4 burners, grill and oven is included in the sale
- Separate heads compartment (all GRP mouldings) is nearly finished
- Rear cabin goes under the cockpit sole
- Forward of the saloon there is a further double cabin fitted out with a 2.1m (7ft) bed and lockers and draws finished in oak (requires completing)
- Headroom 1.88m (6ft 2in)
Remarks:
This very heavily built hull is a stretched Spray 28. She was built by the builder for his own personal use, and subsequently sold to the current owner. She is now for sale due to a change of plans, and would ideally suit someone who wishes to fit out a vessel to their own specifications. Lying ashore.
Topsail Marine Yacht Brokers is acting as brokers (or in the case of classified adverts, advertising medium) only and unless stated otherwise the vendor is not selling in the course of business. Whilst every care has been taken in their preparation, the correctness of particulars is not guaranteed and they are intended as a guide only. Prospective purchasers are strongly advised to check all particulars and where appropriate employ an independent qualified agent to carry out a survey and/or sea/river trial. Vessels are offered subject to prior sale, amendment or withdrawal without notice.
You are welcome to link to this page, but please do not use content in any other way without our permission.
